To start with a disclaimer:

This system’s name was in no way inspi­red by a beautiful woman. Shame, really. Anyway, the name simply derives from its intended application as a Vertical Array.

So, now for the facts:

VERA10 is a vertical line­array speaker system created specifically for events requi­ring the highest sound quality. The system’s spectacularly high output together with its extremely compact dimensions and low weight means you can run just one speaker system for events with 10 or 10,000 visitors. We designed a new 10“ neodymium speaker as the optimal combination of low­ and mid­range driver just for VERA10. Combined with our compression­chamber­phaseplug­ design it reaches an efficiency of more than 103 dB (1 W / 1 m). Our mid / high waveguide, which has undergone significant development, allows the also newly developed tweeters to form a coherent 10° vertical wavefront. This endows VERA10 with the high range power reserves all vertical arrays need. Without those partial vibrations that usually rise dramatically at higher frequencies, distortion is minimal, even above 8 kHz.

The result:

Crystal­clear sounding highs, great definition and a depth more reminiscent of a high­end HiFi cabinet than a PA speaker.
By the way, the HF­Horn with 80° horizontally coverage, which was developed with the Waveformer, can be easily exchanged against the 120° element.
Because of its low weight and easy to use flying hardware, you can build vertical arrays of up to 18 elements and still conform to German BGV­C1 regulations. All the necessary rigging parts except the RF300 flying frame are firmly attached to the cabinet to avoid them getting lost. Luckily we thought about it!
Thanks to its pronounced low frequency performance, VERA10 can also be used without additional sub­ woofers for many applications. VERA S15 and VERA S30 subwoofers are available where stronger bass output is required.
The S15 subwoofer in particular can easily be integrated into VERA10 rigging with its flying system, offering a visually subtle bass extension when flown above or stacked below the tops. Good cause.
Not forget to mention, the compre­ hensive and sophisticated range of accessories. They make transport as well as rigging and daily use very easy peasy. For example our VERA DL10 dolly let you store and trans­ port up to 24 VERA10 modules but only takes up the space of an ordinary Euro pallet.
You were told line­arrays could only be flown, not stacked? Not ours! The RF300 rigging frame doubles up as a stacking frame.
But if you prefer there is also a GF10 ground frame with horizontally and vertically adjustable feet available. You want to use two or three ele­ ments as a sound system for smaller event on a tripod – not a problem at all ­ that’s what our SF10 small frame is for. Inverted, the SF10 also allows you to hang up to 3 elements off a half­coupler.
Now that’s what we call intelligent.

• Technical Data
• Accessories

Drivers	1 x 10“ LF / 2 x 1“ HF
Frequency range	60 - 15000 Hz
Power capacity programm/peak:	500 / 1000 W biamped LF 200 / 400 W biamped HF 600 / 1200 W passiv
Impedance	16 Ohm biamped LF 16 Ohm biamped HF 12 Ohm passiv
Coverage range (h x v)	80° or 120 ° x 10°
Sensitivity 1 W / 1m	103 dB biamped LF 112 dB biamped HF 104 dB passiv
SPLmax / 1m	133 dB
Connectors	2 Speakon NL 4
Dimensions (h x w x d)	275 x 500 x 355 mm
Weight	16,9 kg / 18 kg with passive crossover
Finish	Polyurea coating
Accessories	H120, CaseV10, DL10, RF300, GF10, SF10
Options	PWVERA10 internal passive crossover switchable bet- ween active and passive mode, RAL colours

	PWVERA10 Passive option for VERA10 Passive option, internal passive crossover to either operate VERA10 top in passive mode at one amplifier channel (12 ohms nominal impedance) or to operate in standard active mode (biamped)
	VERA DL10 2-part dolly with top and base part to transport up to twelve VERA10 plus RF300 2-part dolly with top and base part to transport up to twelve VERA10 plus RF300, four 100 mm swivel castors with brakes, dimensions 800 x 600 x 325 mm, weight 26.5 kg
	CaseVERA10 Flightcase for four VERA10 and one RF300 Flightcase for four VERA10 and one RF300, professional version made of black PVC laminated 9 mm birch ply- wood, high quality interior fittings, four 100 mm swivel castors, with brakes, six recessed sprung handles, dimensions 800 x 670 x 910 mm, weight 43 kg
	HSF MOUNTING ADAPTER Flange to mount swivel brackets on standard speaker stand or distance pole (36 mm pipe), incl. two M10 screws and nuts
	KSVO6-035 chain fastener chain fastener hardened, tempered and galvanized, CE certified, 0.35 t WLL, enables direct connection of two DSF or connection of DSF with DHRT
	SS06-100 Safety, steel, diameter 6mm Safety steel, diameter 6 mm, length 1 m, for saving loads up to 60 kg based on VBG requirements incl. two shackles with WLL 0.5 t
	SS08-100 Safety, steel, diameter 8mm Safety steel, diameter 8 mm, length 1 m, for saving loads up to 120 kg based on VBG requirements incl. two shackles with WLL 1 t
	VERA RF300 Rigging Frame for VERA10 / VERA S15 Rigging Frame for VERA10 / VERA S15, to hang up to eighteen VERA10 based on BGVC1, can also be used as ground stacking frame, dimensions 690 x 580 x 110 mm, weight 19 kg
	VERA GF10 Ground frame for VERA10 / VERA S15 Ground frame for VERA10 / VERA S15, with extandable and adjustable spindle feet for tilt resistant setup and hight compensation, dimensions 690 x 620 x 150 mm, weight 13.5 kg
	VERA SF10 Small frame for up to three VERA10 Small frame for up to three VERA10 to place on tripod with HSF or to hang with DHST, dimensions 500 x 380 x 110 mm, weight 5.5 kg